Included in this kit:
b: One (1) weatherproof terminal enclosure + lid
c: four (4) quick-install jumper bars
Not included: power supply, MINIMIS luminaires, landscape wiring, 12-gauge bridging wiring, splices, tools, line-voltage plug-end.
NOTE: It is your responsibility to ensure that any changes to your configuration do not exceed the maximum number of sixty apertures on your power supply. Adding more than sixty apertures to your power supply will invalidate your warranty.
1PUCK LP = 1 aperture. Max. 60 1PUCK LP per power supply.
THUMBTACK LP = 1 aperture. Max. 60 THUMBTACK LP per power supply.
BOLLARD LP = 3 apertures. Max. 20 BOLLARD LP per power supply.
NOTE: This configuration not valid for BOLLARD LP luminaires. Contact us for assistance.
For configurations of greater than 60 apertures, additional complete power kits are required.
Contact us for assistance.
Installation instructions for the LP Power Kit can be found here. Before installing, consult a licensed electrician to ensure proper safety procedures, and compliance with local and national codes and ordinances. Always wear eye protection.
Subject to availability, MINIMIS reserves the right to substitute for "as good or better" items.
Note: Items may arrive in separate boxes, on separate dates.
LP POWER KIT ACCESSORIES
Click on the graphics above for the available power kits.