logo

The MP Series POWER KITS is for powering up to 30 MINIMIS MP Series luminaires (PILLBOX MP, PINPRICK MP, NICK MP, PORE MP, STOMA MP). Not compatible or interoperable with LP Series luminaires.

The MP Series Power Kit features 3-in-1 dimming capability, namely 0~10Vdc, 10V PWM , 10V resistance, and DALI. MP Series luminaires are not individually-addressable. Read the installation instructions before connecting to mains power.

The SELV Class II (Max. 5-amp) IP67 UL-listed power supply in our power kit is UL 60950-1 compliant, featuring SELV-conformal circuitry and protections, and is suitable for operation in any mains environment from 110V to 277V, 50-60Hz.

SELV transformers feature a SELV circuit is a "secondary circuit which is so designed and protected that under normal and single fault conditions, its voltages do not exceed a safe value." A "secondary circuit" has no direct connection to the primary power (AC mains) and derives its power via a transformer, converter or equivalent isolation device.

SELV output is achieved through electrical isolation with double or reinforced insulation between the primary and secondary side of the transformers. Moreover, to meet SELV specifications, the voltage between any two accessible parts/conductors or between a single accessible part/conductor and earth must not exceed a safe value, which is defined as 42.4 VAC peak or 60VDC for no longer than 200 ms during normal operation. Under a single fault condition, these limits are allowed to go higher to 71VAC peak or 120VDC for no longer than 20 ms.

     

Click on the graphics above for the available power kits.

Crestron compatibility information.